强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

对史密斯-帕塞尔自由电子激光光栅的研究

为了研究史密斯-帕塞尔自由电子激光的输出频率和光栅槽深、光栅槽长、光栅槽宽的关系,对于基于矩形光栅的史密斯-帕塞尔自由电子激光利用粒子模拟软件进行模拟和理论分析。首先,利用粒子模拟软件模拟对于基于矩形光栅的史密斯-帕塞尔自由电子激光进行了研究,发现史密斯-帕塞尔自由电子激光的输出频率随光栅槽深、光栅槽长、光栅槽宽的增大而减少。接着,对史密斯-帕塞尔自由电子激光的光栅槽进行了理论分析,发现每个光栅槽都可以等效为一个LC谐振电路,并发现在史密斯-帕塞尔自由电子激光中存在两种辐射,一种是史密斯-帕塞尔辐射,另一种是LC振荡辐射。最后,对光栅槽的LC振荡辐射进行了估算,发现史密斯-帕塞尔自由电子激光输出频率的模拟值与光栅槽的LC振荡辐射估算值的数量级均为102 GHz,且变化规律上一致。据此推测决定史密斯-帕塞尔自由电子激光输出频率的应该是光栅槽,而不是谐振腔。     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

用矩形栅自动相移法测量三维物体形状

本文介绍了一种自动测量物体三维形状的新方法。该方法将矩形栅投影于三维物体表面，利用图像处理系统自动产生云纹和自动实现云纹相移，实现了三维物体形成恢复。本文通过实验验证了该方法的正确性下处理精度。方法容易实现，能较好消除多种系统误差，抗干扰能力强，精度和自动化程度高。     

温升对大型精密离心机结构和技术性能的影响

讨论了温升时所研制的大型精密离心机液体静压轴承工作模式、光栅测量系统、失准角的影响，并对离心机热源进行了计算。在理论分析和实验研究的基础上，给出了温升问题的解决方法，并提出了今后精密离心机的改进建议。     

陶瓷阻力曲线测定的新方法——断裂栅法

将零厚度单向试件栅刻蚀工艺应用于晶须增韧氮化硅陶瓷基复合材料表面，通过记录试件所在桥路的输出电压值，可得到随载荷不断增大裂纹逐渐向前扩展过程中每一时刻的裂尖位置和裂纹长度，从而得到该种材料的阻力曲线。     

980nm半导体激光器输出光谱特性的改善

为了改善980nm半导体激光器的输出光谱特性,采用传输矩阵分析法推导了双布喇格光纤光栅谐振腔的传输表达式,对布喇格光纤光栅长度和谐振腔腔长对输出光谱的影响进行模拟仿真,结果表明布喇格光纤光栅长度对输出光谱的影响大于谐振腔腔长对输出光谱的影响,加长布喇格光纤光栅长度能压缩输出光谱线宽.在980nm半导体激光器尾纤上写入不同布喇格光纤光栅长度的双布喇格光纤光栅谐振腔,验证了引入双布喇格光纤光栅谐振腔在压缩980nm半导体激光器输出光谱线宽的同时改善了其输出光谱的稳定性.当环境温度在0~75℃范围内变化时,980nm半导体激光器输出中心波长仅变化0.06nm.     

基于光楔阵列产生光学涡旋阵列的研究

在研究光楔衍射法产生单涡旋的基础上,基于长条形光楔阵列,提出了利用光束阵列衍射产生涡旋阵列的方法.该方法要求光束阵列在平行于光楔边缘方向上的光束间距等于光束直径的整数倍.利用超精密机床采用一体化加工法加工了光楔阵列元件,验证了该方法的可行性.利用空间光调制器快速灵活调整光束阵列的优点,搭建了借助空间光调制器加载达曼光栅衍射产生所需光束阵列的实验光学系统.针对光束阵列与光楔阵列的匹配问题,研究了达曼光栅掩模图基本单元对光束阵列的调控,获得了可调结构的光束阵列.实验产生了拓扑荷一致的光学涡旋阵列,与仿真结果相一致,证明所提方法的有效性.     

Surface strain-field determination of tympanic membrane using 3D-digital holographic interferometry

In order to increase the understanding of soft tissues mechanical properties, 3D Digital Holographic Interferometry (3D-DHI) was used to quantify the strain-field on a cat tympanic membrane (TM) surface. The experiments were carried out applying a constant sound-stimuli pressure of 90 dB SPL (0.632 Pa) on the TM at 1.2 kHz. The technique allows the accurate acquisition of the micro-displacement data along the x, y and z directions, which is a must for a full characterization of the tissue mechanical behavior under load, and for the calculation of the strain-field in situ. The displacements repeatability in z direction shows a standard deviation of 0.062 µm at 95% confidence level. In order to realize the full 3D characterization correctly the contour of the TM surface was measured employing the optically non-contact two-illumination positions contouring method. The x, y and z displacements combined with the TM contour data allow the evaluation its strain-field by spatially differentiating the u(m,n), v(m,n), and w(m,n) deformation components. The accurate and correct determination of the TM strain-field leads to describing its elasticity, which is an important parameter needed to improve ear biomechanics studies, audition processes and TM mobility in both experimental measurements and theoretical analysis of ear functionality and its modeling.     

In-plane ESPI using an achromatic interferometer with low-coherence laser source

The use of an achromatic interferometer is explored as a means of doing in-plane ESPI measurements using a laser diode as the light source. This interferometer type, which uses a diffraction grating in place of the conventional beamsplitter, has two features that make it suitable for making ESPI measurements over extended areas, even when using a low-coherence laser diode source. First, the parallelogram optical geometry of the interferometer causes all rays passing through to have the same optical path lengths. Second, the interferometer is achromatic, whereby the piezo-actuated mirror that steps the illumination light does so by the same phase angle, independent of wavelength. This latter feature accommodates the spectral impurity of a laser diode source. A periodic variation of fringe visibility is observed in experiments, where narrow ranges of high visibility occur at regular spatial intervals. This behavior derives from the clustered discrete spectral character of laser diode light output. A method to “tune” the interferometer by slightly rotating the diffraction grating is described so as to achieve consistent high fringe visibility throughout the measured images.